Yard - Power ::
CHIPPER, 6" BRUSH CHIPPER BC700XL

Web Link: <Click Here>
Where to find CHIPPER, 6  BRUSH CHIPPER BC700XL in Chicago

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: VERMEER
Model: BC700xl
Daily: $235.00
Comments:
  • Vermeer continues to respond to the demands of the rental, landscape and tree care professionals with the BC700XL brush chipper. The BC700XL design is based on operator feedback and focuses on productivity advantage and ease-of-use. The brush chipper features a centrifugal clutch system, 25 horsepower Kohler EFI engine, bottom feed stop bar and Vermeer exclusive SmartFeed feed-sensing control system. The new member of the chippers line offers the compact size operators are looking for and the performance they want to achieve a job efficiently.
  • The centrifugal clutch engagement prevents belt slip when engaging the clutch which means fewer maintenance costs. The 25 hp Electronic Fuel-Injected (EFI) Kohler engine performs well during cold-weather starts, has reduced occurrence of engine flooding and provides improved fuel economy over comparable carbureted gas engines. The large infeed opening makes feeding irregular material easier and decreases the amount of saw cuts needed prior to feeding the chipper. The exclusive SmartFeed, patented feed-sensing control system, from Vermeer helps increase operator productivity and reduces strain on vital engine parts, as engine rpm is monitored and feed rollers are controlled. A bottom feed stop bar is strategically located to make it possible for the operator's leg to strike the bar and shut off the feed mechanism either intentionally or automatically in an emergency situation. The wide offers a wide footprint at the axle for side-to-side stability; additionally enhances transportability and visibility while backing up.
  • Brush Chippers > BC700XL Specs. General Dimensions and Weights
  • 6.8 gallon unleaded fuel tank. Burns 2 gallons per hour on max rpm.
  • 2" ball to tow the unit.
  • Length - Feed Table Up,Tongue In 113"
  • Length - Table Down, Tongue Extended 133"
  • Width 71"
  • Height 102"
  • Make and Model Kohler ECH740
  • Gross Horsepower (Maximum) 25 hp
  • Torque (Max) 41.7 ft-lb
  • Fuel Tank Capacity 6 gal
  • Max Fuel Consumption 2.4 gph
  • Fuel Type Gasoline
  • Air Cleaner Kohler HD 2-Stage Dry
  • Oil Filter Spin-on
  • Recommended Oil Kohler oil or API CH4/SJ
  • Oil Volume with Filter 2 qt
  • Maximum Angle of Continuous Operation 25 deg
  • Cooling Medium Oil/Air
  • Alternator 20A Charging
  • Clutch Type Centrifugal PTO
  • Clutch Drive Engagement Centrifugal
  • Feed System
  • Feed Roller Orientation Horizontal
  • Feed Roller Clamp Load 525 lbs
  • Feed Roller Clamp Type Spring/Feed Roller Weight
  • Feed Roller Minimum Distance to Drum 4"
  • Feed Roller Dimension 10
  • Weight of Feed Roller 100 lbs
  • Motor Displacement 14.2
  • Motor Manufacturer White Hydraulics
  • Feed Speed 49.4 ft/min
  • Infeed Table Width 41.2"
  • Infeed Table Length 30.2"
  • Infeed Hopper Height 22.1"
  • Infeed Throat Capacity 6" x 8"
  • Pinch Point - Distance to End of Feed Table 65.4"
  • Distance from Feed Table to Ground 28.1"
  • Safety System
  • Bottom Feed Stop Bar Standard
  • Bottom Feed Stop Bar Diameter 2"
  • Bottom Feed Stop Bar Material Thickness .12
  • Reset Method Dual green hold-to-run buttons
  • Four Position Feed Control Bar Standard Diameter 2"
  • Material Thickness .1"
  • Positions
  • Four position: (E-Stop),
  • Forward, Stop, (Reverse)
  • Green Hold to Run Button Standard
  • Drum/Disc Cutting System
  • Material Capacity 6"
  • Width 8"
  • Thickness 1.3"
  • Diameter 23.9"
  • Speed 1748
  • Weight With Shaft 176 lbs
  • Knife Thickness .6"
  • Material A8 Chipper Steel
  • Replaceable Threaded Knife
  • Block
  • Yes
  • Fixture Method Welded
  • Air Flow 5000 cfm
  • Bedknife Size
  • 4" x 8.6"/(10.2 cm x 21.9 cm)
  • hor; 4" x 5.8"/(10.2 cm x 14.6
  • cm) vert
  • Bedknife Material ASTM A572 Grade 50
  • Cutter Drive Components - Engine Option One
  • Bore 1.5" 3.8 cm
  • Type
  • Flange-mounted ball type,
  • self-aligning
  • Manufacturer Linkbelt
  • Dynamic Capacity 5640 lbs
  • Static Capacity 4460 lbs
  • Belt Idler/Tensioner Spring-loaded adjustable Idler
  • Belt Type 2-band 5-V profile Aramid
  • Discharge System
  • Chute Height 97.2"
  • Bottom Thickness .1" .3 cm
  • Top Thickness .1" .3 cm
  • Side Wall Thickness .1" .3 cm
  • Deflector Thickness .1" .2 cm
  • Chute Rotation Angle 240 deg
  • Rotation Type Manual
  • Rotational Lock Standard Latch
  • Hydraulic System
  • Tank capacity 6.8 gal 25.7 L
  • Recommended Oil Type Vermeer VMF Gold
  • System Type Open center
  • Filtration Method
  • Return flow filtration, 10
  • micron
  • Pump Flow at Maximum RPM 3.8 gpm 14.4 L/min
  • System relief pressure 2500 psi 172.4 bar
  • Electrical System
  • System Voltage 12 Volt
  • Battery Group 26, 400 CCA
  • Standard Gauges Hour meter
  • Switches Hold-to-run, sensitivity selector
  • Controller Vermeer ACS CB02
  • Chassis
  • Frame Description
  • 3/16"/(.5 cm) ASTM A1011
  • steel
  • Hitch Type 2"/(5.1 cm) ball coupler
  • Fender Description .1"/(.3 cm) Steel bolt-on
  • Axle/Suspension
  • 2000 lb/(907.2 kg) rubber
  • torsion axle
  • Type - Option One Rubber Torsional
  • Manufacturer - Option One Dexter
  • Capacity - Option One 2000 lb/(907.2 kg)
  • Tires - Option One ST185/80D13 load range D
  • Wheels - Option One 13 x 5, bolt circle 5 on 4.5
  • Axle/Suspension
  • Type - Option Two Rubber torsional, braked
  • Manufacturer - Option Two Dexter
  • Capacity - Option Two 2000 lb/(907.2 kg)
  • Brake Type Electric optional
  • Trailer Light Type LED
  • Other Options
  • Special Paint Available, Optional
  • Extended Warranty Available, Optional
  • Preventive Maintenance Available, Optional
  • www.vermeer.com
  • SPECS:
  • Length 110 " 279.4 cm
  • Width 53.5 " 135.9 cm
  • Height 94 " 238.8 cm
  • Engine
  • Make and Model Kohler Command Pro 27
  • Horsepower 27 hp 20.1 kw
  • Feed System
  • Chipping Capacity 6 " 15.2 cm
  • Towable 2" Ball
  • 48" Total width - Disch chute 89" High W/ 240 Degree rotation 7gal fuel
Add of the above items to my quote request
for a period of   day(s)  





Also check the following item(s) related to the above:

 * Prices are subject to change. Tax and other fees are not shown in this price estimate.

* Please call us with any questions about our chipper 6 inch brush chipper bc700xl rentals in Chicago metro area, including Skokie IL, Glenview IL, Wheeling IL and Chicagoland.

Skokie: (847) 677-2010 Wheeling: (847) 537-2255 Glenview: (847) 657-9020